Printer Configuration and Adjustment
Adjust Printer Settings—RFID Settings
106
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
RFID TEST
RFID Test During the RFID test, the printer attempts to read and write to a transponder. No printer
movement occurs with this test.
User menu item:
Main Menu >
RFID
To test an RFID label:
1. Position the RFID label with its transponder over the
RFID antenna array.
2. Press RIGHT SELECT to select START.
The results of the test are shown on the display.
Accepted values:
quick—performs a read EPC test and a write EPC test
(using random data)
read—performs a read EPC test
write—performs a write EPC test (using random data)
SGD command used:
rfid.tag.test.content and
rfid.tag.test.execute
Table 7 • RFID Settings (Continued)
To Next Page
Loading...