Printer Configuration and Adjustment
Adjust Printer Settings—Print Settings
80
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
PRINT WIDTH
Print Width Specify the width of the labels being used, in dots. The default value is the maximum
width for the printer, based on the printhead’s DPI value.
User menu item:
Main Menu >
SETTINGS
Accepted values:
Note • Setting the width too narrow can result in
portions of a label format not being printed on
the media. Setting the width too wide wastes
formatting memory and can cause the printer to
print off of the label and onto the platen roller.
This setting can affect the horizontal position of
the label format if the image was inverted using
the
^POI ZPL II command.
ZT410 203 dpi =
0002 to 832
Related ZPL command(s):
^PW
SGD command used:
ezpl.print_width
Printer web page: View and Modify Printer Settings > Media Setup >
Print Width
Table 4 • Print Settings (Continued)
To Next Page
Loading...