Zebra Silverline ZT410 - Page 81

81
Printer Configuration and Adjustment
Adjust Printer Settings—Print Settings
10/7/16 ZT410 RFID Printer for Silverline Media User Guide P1089083-001
PRINT MODE
Print Mode Select a print mode that is compatible with your printer options.
User menu item:
Main Menu >
SETTINGS
Accepted values:
• TEAR OFF
• CUTTER *
• PEEL *
• REWIND *
* Do not use with Silverline media.
Related ZPL command(s):
^MM
SGD command used:
media.printmode
Printer web page: View and Modify Printer Settings > General Setup >
Print Mode
LEFT POSITION
Label Left
Position
If necessary, shift the print position horizontally on the label. Positive numbers move
the left edge of the image toward the center of the label by the number of dots selected,
while negative numbers move the left edge of the image toward the left edge of the
label.
User menu item:
Main Menu >
SETTINGS
Accepted values:
–9999 to 9999
Related ZPL command(s): ^LS
SGD command used:
zpl.left_position
Printer web page: View and Modify Printer Settings > Advanced Setup >
Left Position
Table 4 • Print Settings (Continued)