Printer Configuration and Adjustment
Adjust Printer Settings—Print Settings
82
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
REPRINT MODE
Reprint Mode When reprint mode is enabled, you can reprint the last label printed by pressing and
holding
PAUSE + CANCEL or by pressing the DOWN ARROW when at the printer’s
Idle Display.
User menu item:
Main Menu >
SETTINGS
Accepted values:
• ON
• OFF
Related ZPL command(s):
^JZ
SGD command used:
ezpl.reprint_mode
Table 4 • Print Settings (Continued)
To Next Page
Loading...