Getting Started
22
5. Charge the device.
6. Power on the device.
Installing the SIM Card
NOTE: TC75x only.
NOTE: The TC75x may contain one mini SIM slot and two nano SIM slots. If using a micro SIM card, a third-party SIM adapt-
er is required. By default, use a nano SIM card in slot 1.
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper ESD precau-
tions include, but not limited to, working on an ESD mat and ensuring that the user is properly grounded.
1. Remove access cover.
Figure 3 TC75x SIM Slot Locations
mini SIM Slot
nano SIM Slot
1 (default)
nano SIM
Slot 2
To Next Page
Loading...
Need help?
General
