Name: Zebra TC70 Series
Brand: Zebra
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Getting Started

3. Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on each

side of the door.

Figure 7 Insert microSD Card in Holder

4. Re-install the access door.

Installing the Hand Strap and Battery

NOTE: User modification of the device, particularly in the battery well, such as labels, asset tags, engravings, stickers, etc.,

may compromise the intended performance of the device or accessories. Performance levels such as sealing (Ingress Pro-

tection (IP)), impact performance (drop and tumble), functionality, temperature resistance, etc. could be effected. DO NOT

put any labels, asset tags, engravings, stickers, etc. in the battery well.

NOTE: Installation of the hand strap is optional. Skip this section if not installing the hand strap.

1. Remove the hand strap filler from the hand strap slot. Store the hand strap filler in a safe place for future

replacement.

Figure 8 Remove Filler

Questions and Answers:

Need help?

Do you have a question about the Zebra TC70 Series and is the answer not in the manual?

Zebra TC70 Series Specifications

General