Name: Zebra TC70 Series
Brand: Zebra
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Getting Started

2. Insert a SIM card into the SIM slot with the cut edge toward the middle of the device and the contacts facing

down.

Figure 4 nano SIM Card Installation

Figure 5 Mini SIM Card Installation

3. Ensure that the SIM card is seated properly.

Installing a microSD Card

The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack.

Refer to the documentation provided with the card for more information, and follow the manufacturer’s

recommendations for use.

CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD pre-

cautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.

1. Remove the hand strap, if installed.

2. Lift the access door.

Figure 6 Lift Access Door

Questions and Answers:

Need help?

Do you have a question about the Zebra TC70 Series and is the answer not in the manual?

Zebra TC70 Series Specifications

General