Zebra ZD410 User Manual

Troubleshooting
127
Alert: OUT OF MEMORY
Can not store data in the printer in the specified memory location. There are four types of storage
memory: Graphic, Format, Bitmap and Font. There is not enough memory to perform the function specified
on the second line of the error message.
Possible Cause - 1
There is not enough memory to perform the function specified on the second line of the error message.
Resolution
1 — Free up some of the printer’s memory by adjusting the label format or printer parameters to make the
print area smaller.
2 — Remove unused graphics, fonts, or formats.
3 — Ensure that the data is not directed to a device that is not installed or is unavailable.

Zebra ZD410 Specifications

General

Wi-Fi	Yes
Ethernet LAN	No
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.1
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Print technology	Direct thermal
Maximum resolution	300 x 300 DPI
Maximum print height	991 mm
Maximum printing width	56 mm
Flash memory	512 MB
Internal memory	256 MB
Built-in barcodes	1D, 2D
Page description languages	EPL, EPL2, XML, ZPL, ZPL II
Display	-
Product color	Gray
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 41 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Core diameter	12.7 mm
Media thickness	0.08 - 0.305 mm
Maximum roll diameter	127 mm
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	220 mm
Width	115 mm
Height	151 mm
Weight	1000 g