58
Setup for Windows OS
This section assists you in setting up and operating your printer for the first time.
Windows to Printer Communication Setup (Overview)
For supported Windows Operating systems (most common) with a Local (wired) connection:
1. Download the Zebra Setup Utilities from the Zebra web site.
• ZD410 Direct Thermal Printer — www.zebra.com/zd410d-info
2. ‘Run’ the Zebra Setup Utilities from your Download directory.
3. Click on ‘Install New Printer’ and run the install wizard.
4. Select ‘Install Printer’.and select your printer’s model number from the list of ZDesigner printers.
5. Select the port (USB or Serial) that you connected to the PC. Use these interfaces to assist Wizard
guided installation of networked or Bluetooth Classic (4.0).
6. Turn the printer ON and configure printer communications for your interface type.
7. Use the Windows driver to print a ‘Test Print’ to verify operation with Windows.
To Next Page
Loading...