Zebra ZD410 User Manual

Troubleshooting
130
Issue: Labels Are Distorted in Size or Print Area Start Position Varies
Includes printed image that skips between labels (mis-registration).
Possible Cause - 1
Media has been loaded incorrectly or the movable media sensor is not set properly.
Resolution
Verify that the sensor is set and positioned correctly for your media type and sensing location. See
Loading Roll Media ,Setting Media Sensing by Media type, and Using the Movable Sensor.
Possible Cause - 2
The media sensors are not calibrated for your media length, physical properties, or sensing type
(gap/notch, continuous, or mark).
Resolution
See Run a SmartCal Media Calibration. or if it still skips labels try a Manual Media Calibration.
Possible Cause - 3
The platen (drive) roller is slipping or damaged.
Resolution
Clean or replace the platen. Platens can wear out or get damaged. See Platen Cleaning and Replacement.
Possible Cause - 4
The printer has communication issues with cables or communication settings.
Resolution
See Communication Issues.

Zebra ZD410 Specifications

General

Wi-Fi	Yes
Ethernet LAN	No
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.1
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Print technology	Direct thermal
Maximum resolution	300 x 300 DPI
Maximum print height	991 mm
Maximum printing width	56 mm
Flash memory	512 MB
Internal memory	256 MB
Built-in barcodes	1D, 2D
Page description languages	EPL, EPL2, XML, ZPL, ZPL II
Display	-
Product color	Gray
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 41 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Core diameter	12.7 mm
Media thickness	0.08 - 0.305 mm
Maximum roll diameter	127 mm
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	220 mm
Width	115 mm
Height	151 mm
Weight	1000 g