Diagnostics and Troubleshooting
111
“In-Spec” The “in-spec” barcode can only be confirmed by a verifier, but it should exhibit some visible
characteristics.
• The normal barcode will have complete, even bars and clear, distinct spaces.
• The rotated barcode will have complete, even bars and clear, distinct spaces. Although it may not look
as good as a slightly dark barcode, the barcode will be “in-spec.”
• In both normal and rotated styles, small alphanumeric characters look complete.
Slightly Light Slightly light labels are, in some cases, preferred to slightly dark ones for “in-spec” barcodes.
• Both normal and rotated barcodes will be in spec, but small alphanumeric characters may not be
complete.
Too Light Labels that are too light are obvious.
• Both normal and rotated barcodes have incomplete bars and spaces.
• Small alphanumeric characters are unreadable.
To Next Page
Loading...