Install the Printer Driver and Connect to a Computer
146
Connect a Computer to the Printer’s USB Port
Complete the steps in this section only after you have installed the Zebra Setup Utilities program. If
necessary, complete the steps in Install Zebra Setup Utilities on page 137 before continuing.
IMPORTANT: You must install the Zebra Setup Utilities program before connecting the printer to your
computer. Your computer will not install the correct printer drivers if you connect the printer to it without the
Zebra Setup Utilities program.
CAUTION—PRODUCT DAMAGE: Connecting a data communications cable while the power is on (I) may
damage the printer. Turn the power off (O).
Running the System Prepare Wizard
If you are at the Zebra Setup Utilities screen, you do not need to complete this section. Continue with
Connecting the printer to a USB port on your computer on page 147.
The first time that you install the Zebra Setup Utilities program and printer drivers, you are prompted to
follow the System Prepare Wizard.
Figure 9 System Prepare Wizard
1. Click Next.
The System Prepare Wizard prompts you to connect the printer to the USB port on your computer.
To Next Page
Loading...