Install the Printer Driver and Connect to a Computer
149
Connect a Computer to the Printer’s Serial or Parallel Port
Complete the steps in this section only after you have installed the Zebra Setup Utilities program. If
necessary, complete the steps in Install Zebra Setup Utilities on page 137 before continuing.
If you are at the Zebra Setup Utilities screen, you do not need to complete this section. Continue with
Adding a Printer from the Zebra Setup Utilities Screen on page 151.
IMPORTANT: You must install the Zebra Setup Utilities program before connecting the printer to your
computer. Your computer will not install the correct printer drivers if you connect the printer to it without the
Zebra Setup Utilities program.
CAUTION—PRODUCT DAMAGE: Connecting a data communications cable while the power is on (I) may
damage the printer. Turn the power off (O).
Running the System Prepare Wizard
The first time that you install the Zebra Setup Utilities program and printer drivers, you are prompted to
follow the System Prepare Wizard.
Figure 11 System Prepare Wizard
1. Select “Other computer ports (Parallel Port, Serial Port, TCP-IP Port, ...), and then click Next.
The new printer wizard prompts you to begin the installation procedure.
To Next Page
Loading...