Install the Printer Driver and Connect to a Computer
156
Connect to Your Network through the Printer’s Ethernet Port
If you wish to use a wired print server (Ethernet) connection, you may need to connect the printer to your
computer using one of the other available connections. While the printer is connected via one of those
connections, you would configure the printer to communicate with your Local Area Network (LAN) through
the printer’s wired print server.
For additional information about Zebra print servers, refer to the ZebraNet Wired and
Wireless Print Server User Guide. To download the latest version of this guide, go to
http://www.zebra.com/zt400-info.
1. Install Zebra Setup Utilities as instructed in Install Zebra Setup Utilities on page 137.
2. Plug the female end of the A/C power cord into the A/C power connector on the back of the printer.
3. Plug the male end of the A/C power cord into an appropriate power outlet.
To Next Page
Loading...