Printer Setup
13
Install Label Software
Select and install the software that you will use to create label formats for your printer. One option is
ZebraDesigner, which you can download from www.zebra.com.
Install Printer Drivers and Connect the Printer to Your Devices
After you have set up the printer, verified that it can print a test label, and made adjustments to the print
quality, you are ready to connect the printer to your device (such as a computer, phone, or tablet).
Connect to a Computer
If you have not already done so, install the Zebra Setup Utilities program (www.zebra.com/setup) before
connecting the printer to a computer. Your computer will not install the correct printer drivers if you connect
the printer to it without the Zebra Setup Utilities program.
Run the Zebra Setup Utilities program. This utility will walk you through the process for connecting your
printer to your computer. For step-by-step instructions, see Install the Printer Driver and Connect to a
Computer on page 137.
Connect to a Phone or Tablet
Use the Zebra Printer Setup Utility app for Android devices (available for free from Google Play ™ at
http://play.google.com/store/apps/details?id=com.zebra.printersetup).
To Next Page
Loading...