Specifications
188
Optional Connections
Wireless print server
See Wireless Specifications on page 189 for more details.
Limitations and Requirements
• Can print to the printer from any computer on your Wireless Local Area Network (WLAN).
• Can communicate with the printer through the printer’s web pages.
• The printer must be configured to use your WLAN.
• Can be installed only in the top option slot.
Configuration Refer to the
ZebraNet Wired and Wireless Print Servers User Guide
for configuration
instructions. A copy of this manual is available at http://www.zebra.com/manuals.
IEEE 1284 Bidirectional Parallel data interface
Limitations and Requirements
• Maximum cable length of 10 ft (3 m).
• Recommended cable length of 6 ft (1.83 m).
• No printer parameter changes required to match the host computer.
• Can be installed in either the top or bottom option slot.
• An IEEE 1284 cable is required.
Connections and Configuration No additional configuration is necessary.
Applicator interface
with DB15F connector
External ZebraNet 10/100 Print Server
Requires the parallel data interface option
To Next Page
Loading...