Specifications
187
RS-232/C Serial Data Interface
• 2400 to 115000 baud
• parity, bits/character
• 7 or 8 data bit
• XON-XOFF, RTS/CTS, or DTR/DSR handshake protocol required
• 750mA at 5 V from pins 1 and 9
Limitations and Requirements a.You must use a null-modem cable to connect to the printer or a
null-modem adapter if using a standard modem cable.
• Maximum cable length of 50 ft (15.24 m).
• You may need to change printer parameters to match the host computer.
Connections and Configuration The baud rate, number of data and stop bits, the parity, and the
XON/XOFF or DTR control must match those of the host computer.
To Next Page
Loading...