Printer Setup
14
Determine the Label Collection Method
Use a label collection method that matches the media being used and the printer options available (see
Table 2 and Figure 1 on page 16). The media path is the same for roll and fanfold media.
1. On the Home screen, touch Menu > Print > Label Position > Collection Method.
2. Select a collection method that is compatible with the options available on your printer. See Table 2 and
Figure 1 on page 16.
3. Touch the home icon to return to the Home screen.
Table 2 Collection Methods and Printer Options
Collection Method Required Printer Option Description
Tear Off Can be used with any printer
option and most media types.
The printer prints label formats as it receives
them. The printer operator can tear off the
printed labels when the printer stops.
Peel Off Liner Take-Up option or
Rewind option
The printer peels the label from the backing
during printing and then pauses until the label
is removed. The empty backing may be
allowed to exit the front of the printer, or it may
be wound onto the liner take-up spindle or
rewind spindle.
Rewind Rewind option The printer prints without pausing between
labels. The media is wound onto a core after
printing. The rewind plate is used to keep the
labels from separating from the backing.
Cutter Cutter option The printer cuts between labels after each one
is printed.
Delayed Cut Cutter option The printer waits for a delayed cut ZPL
command (
~JK) before it cuts the last printed
label.
To Next Page
Loading...