Zebra ZT411 - System Menu

Printer Configuration and Adjustment
59
System Menu
System > Language
If necessary, change the language that the printer displays. This change affects the words
shown on the following:
• the Home screen
• the user menus
• error messages
• the printer configuration label, the network configuration label, and other labels that you can
select to print through the user menus
Accepted values: ENGLISH, SPANISH, FRENCH, GERMAN, ITALIAN,
NORWEGIAN, PORTUGUESE, SWEDISH, DANISH, DUTCH,
FINNISH, CZECH, JAPANESE, KOREAN, ROMANIAN,
RUSSIAN, POLISH, SIMPLIFIED CHINESE,
TRADITIONAL CHINESE
NOTE: The selections for this parameter are displayed in
the actual languages to make it easier for you to find one
that you are able to read.
Related ZPL command(s):
^KL
SGD command used: display.language
Printer web page: View and Modify Printer Settings > General Setup > Language
System > Program Language > Diagnostic Mode
Use this diagnostics tool to cause the printer to output the hexadecimal values for all data
received by the printer. For more information, see Communication Diagnostics Mode on
page 116.
Accepted values: DISABLED, ENABLED
Related ZPL command(s):
~JD to enable, ~JE to disable
SGD command used:
device.diagnostic_print
Control panel key(s): Hold PAUSE + FEED for 2 seconds when the printer is in the
Ready state.