Printer Configuration and Adjustment
60
System > Program Language > Virtual Device
If any Virtual Device apps are installed on your printer, you may view or enable/disable them
from this user menu. For more information about Virtual Devices, go to the User Guide for the
appropriate Virtual Device, or contact your local reseller.
System > Program Language > ZBI
Zebra Basic Interpreter (ZBI 2.0 ™ ) is a programming option that may be purchased for your
printer. If you would like to purchase this option, contact your Zebra reseller for more
information.
If ZBI programs have been downloaded to your printer, you may select one to run using this
menu item. If no program exists on your printer, NONE is listed.
When ZBI programs have been downloaded but none are running, the printer lists all available
programs. To run one of them, touch Run (highlighted in white) under the program name.
After a program is running, only that program is listed. Touch Stop (highlighted in white) to end
the program.
SGD command used:
zbi.key (identifies if the ZBI 2.0 option is enabled or disabled on
the printer)
To Next Page
Loading...