Diagnostics and Troubleshooting
122
•
STATUS light flashing red
The printer is unable to read the dpi setting of the printhead.
Printers with a ZebraNet wired Ethernet option
•
NETWORK light off
No Ethernet link is available.
•
NETWORK light steady green
A 100 Base link was found.
•
NETWORK light steady yellow
A 10 Base link was found.
•
NETWORK light steady red
An Ethernet error condition exists. The printer is not connected to your
network.
Printers with a ZebraNet wireless option
•
NETWORK light off
A radio was found during power-up. The printer is attempting to associate
with the network. The light flashes red while the printer associates with the
network. The light then flashes yellow while the printer is authenticating
with the network.
•
NETWORK light steady green
The radio is associated with your network and authenticated, and the
WLAN signal is strong.
•
NETWORK light flashing green
The radio is associated with your network and authenticated, but the
WLAN signal is weak.
•
NETWORK light steady red
A WLAN error condition exists. The printer is not connected to your
network.
Table 5 Status of Printer As Shown by Indicator Lights (Continued)
To Next Page
Loading...