Using a USB Host Port and the Print Touch Feature
169
File 8: SMARTDEVINPUT.ZPL
This is the same label format as the previous label, only with different text printing. This format is used for
the smart device input exercise.
File 9: Firmware File
You may want to download a firmware file for your printer and copy it to your computer for use during the
exercises. You may omit doing this if you wish.
You can download the latest firmware file from http://www.zebra.com/firmware.
^XA
^CI28
^BY2,3,91^FT38,184^BCN,,Y,N^FC%,{,#^FD%d/%m/%Y^FS
^FO385,75^XGE:zebra.bmp^FS
^FT40,70^A0N,28,28^FH\^FDThis label was printed using a smart device input. ^FS
^FT35,260^A0N,28,28^FH\^FDThis label was printed by:^FS
^FT33,319^A0N,28,28^FN1"Enter Name"^FS
^XZ
To Next Page