Zebra ZT411 - Page 175

Using a USB Host Port and the Print Touch Feature
171
d. The printer restarts and then displays the message
MIRROR PROCESSING FINISHED.
7. Remove the USB Flash drive from the printer.
Advanced User Information
See the Zebra® Programming Guide for more information about these commands.
Enable/disable mirroring:
! U1 setvar
"usb.mirror.enable" "value"
Values: "on" or "off"
Enable/disable automatic mirroring that occurs when a USB Flash drive is inserted into the USB host
port:
! U1 setvar
"usb.mirror.auto" "value"
Values: "on" or "off"
Specify the number of times that the mirror operation will be repeated if it fails:
! U1 setvar
"usb.mirror.error_retry" "value"
Values: 0 to 65535
Change the path to the location on the USB device from which mirror files are retrieved:
! U1 setvar
"usb.mirror.appl_path" "new_path"
Default: "zebra/appl"
Change the path to the location on the printer from which mirror files are retrieved:
! U1 setvar
"usb.mirror.path" "path"
Default: "zebra"
Enable/disable the ability to use the USB port:
! U1 setvar
"usb.host.lock_out" "value"
Values: "on" or "off"