Printer Setup
54
10.
Select a number of test labels to print.
The printer prints the specified number of test labels and prompts you for the best test label.
11. Decide which test label is the best quality. See Judging Barcode Quality on page 110 for assistance. If
none of the labels are acceptable, use the arrow to back up a screen in the wizard, and select a larger
number of test labels.
12. In the list on the display, select the identifier for the test label with the best quality, and then touch the
check mark.
The printer changes the darkness and speed to the levels used on the best test label.
13. If necessary, see Printing or Print Quality Issues on page 123 to see what other issues may be affecting
your print quality.
The print setup procedure is complete.
To Next Page
Loading...