Zebra ZT411 - Page 88

Printer Configuration and Adjustment
88
Storage > USB > Print: From USB
Select files to print from a USB Flash drive.
To print files from a USB Flash drive:
1. Insert a USB flash drive into the printer’s USB host port.
The printer lists available files.
1. Touch the box next to the desired files. Select All is also available.
2. Touch the check mark to print the selected files.
SGD command used:
usb.host.read_list
Storage > Print Asset Lists
Print the specified information on one or more labels.
Accepted values: Formats—Prints the available formats stored in the printer’s RAM,
Flash memory, or optional memory card.
Images—Prints the available images stored in the printer’s RAM,
Flash memory, or optional memory card.
Fonts—Prints the available fonts in the printer, including standard
printer fonts plus any optional fonts. Fonts may be stored in RAM
or Flash memory.
Barcodes—Prints the available barcodes in the printer. Barcodes
may be stored in RAM or Flash memory.
All—Prints the previous labels plus the printer configuration label
and the network configuration label.
Related ZPL command(s):
^WD
Printer web page: View and Modify Printer Settings > Print Listings on Label