Axiovert 40
B 46-0031 e 11/03 1Ć3
1.2.1 Mechanical design
Axiovert 40 C stand
• Integrated wide input range power supply powerĆ
ing a 12 V 35 W halogen lamp and accepting line
voltages of 100 to 240 V AC without the need for
changing the voltage setting
• NA 0.55, 0.4 and 0.2 condensers; replaceable and
movable
• Coaxial coarse and fine drive with focusing acting
on the nosepiece
• Binocular tube adjustable to two heights with one
fixed and one focusing eyepiece
• Quintuple nosepiece
• Specimen stage prepared for fitting the attachĆ
able object traverser M with the possibility of usĆ
ing different mounting frames
• Optional diaphragm sliders for VAREL and phase
contrast
• Photo/video port
Axiovert 40 CFL stand
• Same as Axiovert 40 C
• Optional diaphragm sliders for VAREL, phase conĆ
trast and PlasDIC
• Upgradeable for fluorescence by HBO 50, FL inciĆ
dent-light fluorescence equipment, 3-position reĆ
flector slider P&C, reflector modules FL P&C with
fluorescence filter sets
Fig. 1Ć1 Instrument models
To Next Page