Axiovert 40
B 46-0031 e 11/03 2Ć23
2.8 Replacing the specimen stage
• Remove the screw cover (2Ć28ā/ā1) from the stage surface.
• Using the SW 3 ball-headed screwdriver, remove three fastening screws (2Ć28ā/ā2) and the stage (2Ć28ā/ā3).
• Fit and fasten the selected specimen stage (specimen stage glass (Section 2.8.1) heatable stage or temperĆ
able microscope stage (Section 2.8.2)).
Fig. 2Ć28 Replacing the specimen stage
1
2
2
3
To Next Page
Loading...
