Zimmer SD Edition PhySys - Stimulating Current Connection (ST1203) (Vacop Mainboard; Suction Electrodes); Pump Connection (BU1401); Valve Connection (ST1502); Water Level Sensor Connection (ST1202)

PhySys Edition SD Service Manual
Rev. B
20.08.2013
Page 18/52
Service Manual PhySysSD_RevB_20.08.2013.do
c
6.2.2.6. Stimulating current connection (ST1203) (VacoP mainboard/ suction electrodes)
Name Note
1 Anode Float.
2 Cathode float.
3 Anode
4 Cathode
6.2.2.7. Pump connection (BU1401)
Name Note
1 12V
2 VACO_Pump
6.2.2.8. Valve connection (ST1502)
Name Note
1 12V
2 VACO_Valve_ON
6.2.2.9. Water level sensor connection (ST1202)
Name Note
1 Vaco_Fluid_Level
2 GND
3 5V 0,5%
4 -