Zimmer SD Edition PhySys - Page 45

PhySys Edition SD Service Manual
Rev. B
20.08.2013
Page 45/52
Service Manual PhySysSD_RevB_20.08.2013.do
c
Error /Error
code(xxxxx)
Description
Error /Error
code(xxxxx)
Description
-1042 Error in IRDA Frame -1060 generic CFLASH error
-1045 Unknown command received -1070 CRC error in FLASH
-1050 cannot detect FLASH -1071 CRC error in FLASH shadow
-1051 protected, cannot erase, prog -1072 CRC error in downloaded firmware
-1073 firmware file has wrong size or format -1110 "SD Card write error"
-1074 memory test error -1111 "SD Card is write-protected"
-1075 the BtlInfo structure is invalid -1120 file system init failed
-1076
the download version is lower than current
version
-1121 SD card file system is not FAT32
-1077 software update done -1122 no file system available
-1079 the software is a debug version -1123 failed to create directory, Error while creating
-1080 can't open file -1124
failed to create directory, file exists with this
name
-1081 error while reading file -1125
failed to create directory, the given path is not a
directory
-1082 error while writing file -1126 failed to create directory
-1083 can't erase file -1130 attempt to set illegal parameter
-1084 can't find file -1131 crc in rx telegram failed
-1085 not enough memory to store file -1132 nack from dsp
-1086 error in file structures -1133 rx or tx queue overflow
-1087 file checksum error, file corrupted -1134 rx or tx queue underflow
-1088
cannot access files because not correctly
initialized
-1135 Command is not allowed for this parameter
-1089 error while closing file -1140 No Head plugged
-1090 File exists and should not be overwritten -1141
Not allowed to set the Flag in the actual US-
Head state
-1100 "No SD Card" -1142 CRC check of EE-data failed
-1101 "Wrong SD Card type", -1143
the EE-data of the US-head are not in a valid
state
-1102 "SD Card command timeout" -1150
-1103 "SD Card is idle" -1151
-1104 "SD Card command error" -1152
-1105
"Read access to SD Card out of memory
range"
-1153
-1106 "SD Card read timeout" -1154
-1107 "SD Card read error" -1160 oscillator stable timout
-1108
"Write access to SD Card out of memory
range"
-1161 PLL settling timeout