ProFace X (DS) User Manual
Page | 44 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Searching the Wi-Fi Network
WIFI is enabled in the device by default. Toggle the button to enable or disable WIFI.
Once the Wi-Fi is turned on, the device will search for the available Wi-Fi within the network
range.
Tap on the required Wi-Fi name from the available list and input the correct password in the
password interface, and then tap Connect to WIFI (OK).
When the WIFI is connected successfully, the initial interface will display the Wi-Fi logo.
WIFI Enabled: Tap on the required
network from the searched
network list.
Tap on the password field to enter
the password and tap on Connect
to WIFI (OK).
To Next Page
Loading...
