MAINTENANCE AND FUNCTION / TOOLHEADS
46
CERAMICS EXTRUDER
(experimental)
Experimental toolhead created for prin-
ting with ceramics. Equipped with pla-
netary gears and a powerful motor, uses
large pushing power to drive the piston.
Can extrude thick mass that solidies
quickly aerwards. Nozzle size
is approximately 1.5mm.
Designed for large scale elements.
To fully experience chocolate/cake
or ceramics printing, please read:
http://zmorph3d.com/how-to-print-with-chocolate/
To Next Page
Loading...
