MAINTENANCE AND FUNCTION / TOOLHEADS
49
See touch probe in action here:
https://vimeo.com/118746466
TIME LAPSE RAIL
TOUCH PROBE
PHOTO CAMERA TRIGGER
Connect your camera to Voxelizer
and create amazing time lapses
of your 3D-prints.
THE SET INCLUDES:
• MINI-FIT PLUG FOR CONNECTING THE CABLES
TO THE MACHINE (USING RIGHT EXTRUDER SOCKET)
• MODULE WITH MINI-JACK PLUG AND 24V CONTACT SWITCH,
THAT WILL INFORM CAMERA ABOUT SHUTTER RELEASE
• THE SET DOES NOT INCLUDE SLIDING RAIL
WITH CAMERA (ON THE PICTURE ABOVE)
• YOU CAN ALSO ADD THE 'M150'-COMMAND TO YOUR
G-CODE TO ACTIVATE THE CAMERA FUNCTION
An addition to the camera trigger
that allows even more professional
use of the photo camera trigger.
Voxalizer generates G-Code to slide
the camera during your 3D print.
This is a separate add-on from
the camera trigger itself.
This tool checks the calibration
of the working table.
All our machines comes calibrated
to 0.1mm, this is an option if you
want even greater precision.
To Next Page
Loading...
Need help?
General
