5. Set whether to record simultaneously with the H5studio.
Use the (selection) dial to select “Mode” and press the (ENTER) button. Then, use the
(selection) dial to select the mode and press the (ENTER) button.
Setting value Explanation
Audio I/F + REC The H5studio can record and play back even when it is being used as
an audio interface.
For details about this function, see “Recording on the H5studio while
using it as an audio interface”.
Audio I/F Only The H5studio will not record or play back when it is being used as an
audio interface.
NOTE
When “Audio I/F Only” is selected, the sample rate, which can be set from the computer, smartphone or
tablet, has 44.1 kHz, 48 kHz and 96 kHz options.
HINT
Using “Audio I/F + REC” mode, the H5studio sample rate setting cannot be changed from the computer,
smartphone or tablet. To set the sample rate from a computer, smartphone or tablet, use “Audio I/F Only”
mode.
6. Select the Sample Rate (when the Mode is “Audio I/F + REC”).
Use the (selection) dial to select “Sample Rate” and press the (ENTER) button. Then,
use the (selection) dial to select the sample rate and press the (ENTER) button.
106
To Next Page
Loading...
