HINT
• This can be set from −16 to −2 dBFS for the compressor and limiter.
• This can be set from −80 to −2 dBFS for the noise gate.
█
Setting the attack time
This sets the amount of time until compression starts after the input signal exceeds the threshold.
1.
Open the Track Setting Screen in the app.
Tap in the following order:
• FIELD app screen >
> select track
• MUSIC app screen > select track >
• PODCAST app screen > > select track
2.
Tap Comp/Limiter/Gate.
3.
Tap Attack Time.
NOTE
Attack Time cannot be set if Type is set to Off.
35
To Next Page
Loading...
