ZyXEL Communications ES-2024 Series - Configure Rapid Spanning Tree Protocol

Chapter 13 Spanning Tree Protocol
ES-2024 Series User’s Guide
121
13.3 Configure Rapid Spanning Tree Protocol
Use this screen to configure RSTP settings, see Section 13.1 on page 115 for more
information on RSTP. Click RSTP in the Advanced Application > Spanning
Tree Protocol screen.
Figure 59 Advanced Application > Spanning Tree Protocol > RSTP
The following table describes the labels in this screen.
Table 26 Advanced Application > Spanning Tree Protocol > RSTP
LABEL DESCRIPTION
Status Click Status to display the RSTP Status screen (see Figure 60 on page
123).
Active Select this check box to activate RSTP. Clear this check box to disable
RSTP.