Chapter 18 Port Authentication
ES-2024 Series User’s Guide
146
request to a RADIUS server. The RADIUS server validates whether this client is
allowed access to the port.
Figure 71 IEEE 802.1x Authentication Process
18.2 Port Authentication Configuration
To enable port authentication, first activate the port authentication method(s) you
want to use (both on the Switch and the port(s)) then configure the RADIUS
server settings in the AAA > Radius Server Setup screen.
Click Advanced Application > Port Authentication in the navigation panel to
display the screen as shown.
Figure 72 Advanced Application > Port Authentication
New Connection
Authentication Request
Authentication Reply
1
4
5
Login Credentials
Login Info Request
3
2
Session Granted/Denied
To Next Page
Loading...
