Chapter 21 Multicast
ES-2024 Series User’s Guide
166
for the multicast traffic. Otherwise, the Switch removes the receiver port from the
forwarding table.
Figure 82 MVR Multicast Television Example
21.7 General MVR Configuration
Use the MVR screen to create multicast VLANs and select the receiver port(s) and
a source port for each multicast VLAN. Click Advanced Applications >
Multicast > Multicast Setting > MVR link to display the screen as shown next.
Note: You can create up to three multicast VLANs and up to 256 multicast rules on the
Switch.
To Next Page
Loading...
