Chapter 21 Multicast
ES-2024 Series User’s Guide
170
21.8.1 MVR Configuration Example
The following figure shows a network example where ports 1, 2 and 3 on the
Switch belong to VLAN 1. In addition, port 7 belongs to the multicast group with
VID 200 to receive multicast traffic (the News and Movie channels) from the
remote streaming media server, S. Computers A, B and C in VLAN 1 are able to
receive the traffic.
Figure 85 MVR Configuration Example
Delete Select Delete Group and click Delete to remove the selected entry(ies)
from the table.
Cancel Select Cancel to clear the checkbox(es) in the table.
Table 48 Advanced Application > Multicast > Multicast Setting > MVR: Group
Configuration
LABEL DESCRIPTION
To Next Page
Loading...
