ZyXEL Communications ES-2024 Series - Setting Port VID

Chapter 5 Initial Setup Example
ES-2024 Series User’s Guide
55
5 Click Add to create the static VLAN and click the Save button to save the settings.
5.1.2 Setting Port VID
Use PVID to add a tag to incoming untagged frames received on that port so that
the frames are forwarded to the VLAN group that the tag defines.
In the example network, configure 2 as the port VID on port 10 so that any
untagged frames received on that port get sent to VLAN 2.
Figure 22 Initial Setup Network Example: Port VID
1 Click Advanced
Applications and VLAN in
the navigation panel. Then
click the VLAN Port
Setting link.
2 Enter 2 in the PVID field for
port 10 and click Apply to
set the VLAN port setting
and click the Save button
to save the settings.