EasyManua.ls Logo

ZyXEL Communications ES-2024 Series - IP Interfaces

ZyXEL Communications ES-2024 Series
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 8 Basic Setting
ES-2024 Series User’s Guide
79
8.6.1 IP Interfaces
The Switch needs an IP address for it to be managed over the network. The
factory default IP address is 192.168.1.1. The subnet mask specifies the network
number portion of an IP address. The factory default subnet mask is
255.255.255.0.
Configure IP addresses for accessing and managing the Switch from the ports
belonging to the pre-defined VLAN(s). See Table 102 on page 283 for how many
IP addresses you can configure.
Figure 35 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 10 Basic Setting > IP Setup
LABEL DESCRIPTION
Domain
Name Server
DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. Enter a domain name server IP
address in order to be able to use a domain name instead of an IP address.
Default Management IP Address
Configure the fields to set the default management IP address.

Table of Contents

Other manuals for ZyXEL Communications ES-2024 Series

Related product manuals