Chapter 17 Link Aggregation
ES-2024 Series User’s Guide
139
17.3 Link Aggregation Status
Click Advanced Application > Link Aggregation in the navigation panel. The
Link Aggregation Status screen displays by default. See Section 17.1 on page
137 for more information.
Figure 66 Advanced Application > Link Aggregation Status
The following table describes the labels in this screen.
Table 35 Advanced Application > Link Aggregation Status
LABEL DESCRIPTION
Group ID This field displays the trunk ID to identify a trunk group, that is, one
logical link containing multiple ports.
Enabled
Ports
These are the ports you have configured in the Link Aggregation screen
to be in the trunk group.
Synchronized
Ports
These are the ports that are currently transmitting data as one logical link
in this trunk group.
Aggregator
ID
Link Aggregator ID consists of the following: system priority, MAC
address, key, port priority and port number. Refer to Section 17.2.1 on
page 138 for more information on this field.
Status This field displays how these ports were added to the trunk group. It
displays:
• Static - if the ports are configured as static members of a trunk group.
• LACP - if the ports are configured to join a trunk group via LACP.
To Next Page
Loading...
