ZyXEL Communications ES-2024 Series - Configuring SNMP

Chapter 29 Access Control
ES-2024 Series User’s Guide
240
29.3.4 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access
Control to go back to the Access Control screen.
Figure 128 Management > Access Control > SNMP
mactable MacTableFullEventOn 1.3.6.1.4.1.890.1.5.8.16.2
7.2.1
1.3.6.1.4.1.890.1.5.8.27.2
7.2.1
This trap is sent when more
than 99% of the MAC table is
used.
MacTableFullEventClear 1.3.6.1.4.1.890.1.5.8.16.2
7.2.2
1.3.6.1.4.1.890.1.5.8.27.2
7.2.2
This trap is sent when less than
95% of the MAC table is used.
rmon RmonRisingAlarm 1.3.6.1.4.1.890.1.5.1.1.15 This trap is sent when a
variable goes over the RMON
"rising" threshold.
RmonFallingAlarm 1.3.6.1.4.1.890.1.5.1.1.16 This trap is sent when the
variable falls below the RMON
"falling" threshold.
Table 83 SNMP Switch Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION