ZyXEL Communications ES-2024 Series - Clustering Management Configuration

Chapter 32 Cluster Management
ES-2024 Series User’s Guide
265
The following table explains some of the FTP parameters.
32.3 Clustering Management Configuration
Use this screen to configure clustering management. Click Configuration from
the Cluster Management screen to display the next screen.
Figure 147 Management > Clustering Management > Configuration
Table 95 FTP Upload to Cluster Member Example
FTP PARAMETER DESCRIPTION
User Enter “admin”.
Password The web configurator password default is 1234.
ls Enter this command to list the name of cluster member
switch’s firmware and configuration file.
360lt0.bin This is the name of the firmware file you want to upload to
the cluster member switch.
fw-00-a0-c5-01-23-46 This is the cluster member switch’s firmware name as seen
in the cluster manager switch.
config-00-a0-c5-01-23-46 This is the cluster member switch’s configuration file name
as seen in the cluster manager switch.