Chapter 23 IP Source Guard
ES-2024 Series User’s Guide
190
The following table describes the labels in this screen.
23.3 IP Source Guard Static Binding
Use this screen to manage static bindings for ARP inspection. Static bindings are
uniquely identified by the MAC address and VLAN ID. Each MAC address and VLAN
ID can only be in one static binding. If you try to create a static binding with the
same MAC address and VLAN ID as an existing static binding, the new static
Table 58 IP Source Guard
LABEL DESCRIPTION
Index This field displays a sequential number for each binding.
MAC Address This field displays the source MAC address in the binding.
IP Address This field displays the IP address assigned to the MAC address in
the binding.
Lease This field displays how many days, hours, minutes, and seconds
the binding is valid; for example, 2d3h4m5s means the binding
is still valid for 2 days, 3 hours, 4 minutes, and 5 seconds. This
field displays infinity if the binding is always valid (for example,
a static binding).
Type This field displays how the Switch learned the binding.
static: This binding was learned from information provided
manually by an administrator.
VID This field displays the source VLAN ID in the binding.
Port This field displays the port number in the binding. If this field is
blank, the binding applies to all ports.
To Next Page
Loading...
