ZyXEL Communications ES-2024 Series - Page 238

Chapter 29 Access Control
ES-2024 Series User’s Guide
238
lldp LLDPRemoteTopologyCha
nge
1.0.8802.1.1.2.0.0.1 This trap is sent when the
LLDP (Link Layer Discovery
Protocol) remote topology
changes.
transceiver-
ddmi
transceiverddmiEventOn 1.3.6.1.4.1.890.1.5.8.45.27
.2.1
This trap is sent when one
of the device operating
parameters (such as
transceiver temperature,
laser bias current,
transmitted optical power,
received optical power and
transceiver supply voltage)
is above or below a factory
set normal range.
transceiverddmiEventClea
r
1.3.6.1.4.1.890.1.5.8.45.27
.2.2
This trap is sent when all
device operating
parameters return to the
normal operating range.
Table 80 SNMP Interface Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
Table 81 AAA Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
authenticati
on
authenticationFailure 1.3.6.1.6.3.1.1.5.5 This trap is sent when
authentication fails due to
incorrect user name and/or
password.
AuthenticationFailureEv
entOn
1.3.6.1.4.1.890.1.5.8.16.27
.2.1
1.3.6.1.4.1.890.1.5.8.27.27
.2.1
This trap is sent when
authentication fails due to
incorrect user name and/or
password.
RADIUSNotReachableEv
entOn
1.3.6.1.4.1.890.1.5.8.16.27
.2.1
1.3.6.1.4.1.890.1.5.8.27.27
.2.1
This trap is sent when there is
no response message from the
RADIUS server.
RADIUSNotReachableEv
entClear
1.3.6.1.4.1.890.1.5.8.16.27
.2.2
1.3.6.1.4.1.890.1.5.8.27.27
.2.2
This trap is sent when the
RADIUS server can be
reached.