ZyXEL Communications GS-4012F - Page 232

GS-4012F User’s Guide
Chapter 39 Introducing the Commands 231
helper-address
<remote-dhcp-
server1> <remote-
dhcp-server2>
<remote-dhcp-
server3>
Sets the IP addresses of up to 3
DHCP servers.
information
Allows the switch to add system
name to agent information.
option
Allows the switch to add DHCP
relay agent information.
server <vlan-id> starting-address
<ip-addr>
<subnet-mask>
<size-of-client>
diffserv
Enables DiffServ.
dscp <0-63> priority
<0-7>
Sets the DSCP-to-IEEE 802.1q
mappings.
exit
Exits from the CLI.
garp join <100-65535>
leave <msec>
leaveall <msec>
Configures GARP time settings.
help
Displays help information.
history
Displays a list of previous
command(s) that you have
executed.
hostname <name_string>
Sets the switch’s name for
identification purposes.
https cert-regeneration
<rsa|dsa>
Re-generates a certificate.
timeout <0-65535>
Sets the HTTPS timeout period.
igmp-snooping
Enables IGMP snooping.
interface port-channel <port-
list>
Enables a port or a list of ports
for configuration. See Section
39.9.4 on page 241 for more
details.
route-domain <ip-
address>/<mask-bits>
Enables a routing domain for
configuration. See Section
39.9.5 on page 244 for more
details.
ip address <ip> <mask>
Sets the IP address and subnet
mask of the out-of-band
management port.
default-gateway
<ip>
Sets the default gateway’s IP
address for the out-of-band
management port.
name-server <ip>
Sets the IP address of a domain
name server.
Table 90 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION