GS-4012F User’s Guide
232 Chapter 39 Introducing the Commands
route <ip> <mask>
<next-hop-ip>
Creates a static route.
<ip> <mask>
<next-hop-ip>
[metric <metric>]
[name <name>]
[inactive]
Sets the metric of a static route
or deactivates a static route.
lacp
Enables Link Aggregation
Control Protocol (LACP).
system-priority <1-65535>
Sets the priority of an active port
using LACP.
loginPrecedence <LocalOnly |
LocalRADIUS |
RADIUSOnly>
Select which database the
switch should use (first) to
authenticate a user.
logins username <name>
password <pwd>
Configures up to four read-only
login accounts.
logout
Exits from the CLI.
mac-aging-time <10-3000>
Sets learned MAC aging time.
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop <src/
dst/both>
Configures a static MAC
address port filtering rule.
inactive
Disables a static MAC address
port filtering rule.
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
Configures a static MAC
address forwarding rule.
inactive
Disables a static MAC address
forwarding rule.
mirror-port
Enables port mirroring.
<port-num>
Enables port mirroring on a
specified port.
mode zynos
Changes the CLI mode to the
ZyNOS format.
multi-login
Enables multi-login.
no bandwidth-control
Disable bandwidth control on
the switch.
bcp-transparency
classifier <name>
Disables the classifier. Each
classifier has one rule.
If you disable a classifier you
cannot use policy rule related
information.
<name> inactive
Enables a classifier.
Table 90 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
