GS-4012F User’s Guide
Chapter 39 Introducing the Commands 235
icmp
Disables ICMP access to the
switch such as pinging and
tracerouting.
snmp
Disables SNMP management.
ssh
Disables SSH (Secure Shell)
server access to the switch.
telnet
Disables telnet access to the
switch.
snmp-server trap-destination
<ip>
Disables sending of SNMP
traps to a station.
spanning-tree
Disables STP.
<port-list>
Disables STP on listed ports.
ssh key
<rsa1|rsa|dsa>
Disables the secure shell server
encryption key. Your switch
supports SSH versions 1 and 2
using RSA and DSA
authentication.
known-hosts
<host-ip>
Removes the specified remote
hosts from the list of all known
hosts.
known-hosts
<host-ip>
[1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts
with the specified public key
(1024-bit RSA1, RSA or DSA).
storm-control
Disables broadcast storm
control.
timesync
Disables timeserver settings.
trunk <T1|T2|T3|T4|T5|T
6>
Disables the specified trunk
group.
<T1|T2|T3|T4|T5|T
6> interface
<port-list>
Removes ports from the
specified trunk group.
<T1|T2|T3|T4|T5|T
6> lacp
Disables LACP in the specified
trunk group.
vlan <vlan-id>
Deletes the static VLAN entry.
vlan1q gvrp
Disables GVRP on the switch.
port-isolation
Disables port isolation.
vlan-stacking
Disables VLAN stacking.
password
Change the password for
Enable mode.
Table 90 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
To Next Page
Loading...
