ZyXEL Communications GS-4012F - Page 235

GS-4012F User’s Guide
234 Chapter 39 Introducing the Commands
name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
inactive
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
mirror-port
Disables port mirroring on the
switch.
multi-login
Disables another administrator
from logging into Telnet or the
CLI.
policy <name>
Deletes the policy. A policy sets
actions for the classified traffic.
inactive
Enables a policy.
port-access-
authenticator
Disables port authentication on
the switch.
<port-list>
Disables authentication on the
listed ports.
<port-list>
reauthenticate
Disables the re-authentication
mechanism on the listed port(s).
port-security <port-
list>
Disables port security on the
specified ports.
learn inactive
Enables MAC address learning
on the specified ports.
radius-server
Disables the use of
authentication from the RADIUS
server.
remote-management <index>
Clears a secure client set entry
from the list of secure clients.
<index> service
[telnet][ftp]
[http][icmp]
[snmp]
Disables a secure client set
entry number from using the
selected remote management
service(s).
router dvmrp
Disables DVMRP on the switch.
igmp
Disables IGMP on the switch.
ospf
Disables OSPF on the switch.
rip
Disable RIP on the switch.
vrrp network <ip-
address>/<mask-
bits> vr-id <1-7>
Deletes VRRP settings.
service-control ftp
Disables FTP access to the
switch.
http
Disables web browser control to
the switch.
https
Disables secure web browser
access to the switch.
Table 90 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION