NBG4604 User’s Guide
195
CHAPTER 22
Sys OP Mode
22.1 Overview
The Sys OP Mode (System Operation Mode) function lets you configure whether
your NBG4604 is a router or AP.
You can choose between Router Mode and AP Mode depending on your network
topology and the features you require from your device. See Section 1.1 on page
21 for more information on which mode to choose.
Note: The Sys OP Mode screen is read-only if you are accessing from the admin
level account .
22.2 What You Can Do
Use the General screen (Section 22.4 on page 197) to select how you connect to
the Internet.
To Next Page
Loading...
